Friday, 15 May 2009

Wing mast


This week we made the new composite wing mast for the whisper project.
This mast was a true composite, made of 6 different fabrics and materials. It is an improvement on the first, better suited to the application of a free standing over-rotating wing mast.

To estimate time of the launch, I am aiming for about a month pending work load and little things like family and getting a sail made. There hardly seems a rush, the hull was made over the Easter of 2007, fitted out and bonded Xmas of 2008. What is it they say about mechanics and their cars?
I've enjoyed this build, its experimental in a lot of areas and this has pushed me into engineering, CAD modelling, design and analysis much further than I thought I would go. With all the hard work behind the scenes, It seems unlikely I'll sell this boat, let alone its taken 4 years to replace the last one, now with kids...
I am looking forward to getting it wet, photos will follow....

Thursday, 2 April 2009

UAV's in Thailand




Some photos of the Cybereye 2 sold to the Royal Thai Air force have filtered back to us.


The aircraft have had a succession of flights, and training exercises. Performance has been improved from the initial prototype, increasing the top speed to 160kph and while reducing the stall speed. By first hand accounts the new design composite wings have made the big difference to the aircraft.

Tuesday, 17 March 2009

Avalon Airshow report

Just back from the Airshow at Avalon Airport, Melbourne. For my first visit to the show I was certainly kept busier than expected.

Our work was represented by Air Affairs, Cybertechnologies, DSTO, Entecho and UAV Vision.
Air Affairs had their Phoenix Target drone on display.

Cybertechnologies had a full stand with cybereye 2 & cybird 5 (#3) fully assembled.
DSTO had Cybird 5 (#2) on display with their 'Bioseeker' hardware installed in the nosecone under a clear hatch for all to see.


Entecho were showing 2 'Mupod' hovering micro UAV's and UAV Vision had their suite of cameras on show

For us it was good to see our work getting out there as well as having a look at what the competition are up to. The usual suspects were there Boeing, Lockheed Martin, Northrop etc. but the coup was Cybertechnologies trumping them all to win best stand at the show!

Now its all over, the dust will settle and we will see what comes of all those meetings, I can say though that I had a great time and I look forward to attending the next show.

Friday, 27 February 2009

published!


Cybereye 2 makes it onto this months front cover of Unmanned vehicles.
It's a great achievement, and with good feedback from subsequent flight tests we are sure it wont be last time cybereye appears on a front page.

Wednesday, 18 February 2009

Planes & boats


More planes left the factory in the last few months, we finished another "Cybird 5" to complete the order, although we are a little concerned about the experience of their pilot!

Another "Phoenix" target drone made its way to the client, and 2 wing sets for the "Cybereye 2" UAV are destined for export in the coming months.

All this and I managed to squeeze in some time to work on the hydrofoil moth hull to have it almost completed.
So, after an extended (!) build time with pattern work starting in October 2005 we are nearing the moment when the boat will finally get wet. The Australian national titles are set for Perth this year in December/January, I have 10 months to get the boat finished and shake-out all the bugs... could be tight.

Thursday, 4 December 2008

Lux at PICA


We are excited to have one of our Lux tables on exhibition at the Perth Institute for Contempoary Arts. The installation is part of the Better places Exhibition open from 3 Dec - 1 Feb and features artists work from all over Australia. www.pica.org.au/view/Better+Places/726/.

The particular work by Jurek Wybraniec is one of the larger pieces featuring a 2100 x 1100 carbon fibre Lux table - to give a sense of scale.

In the words of the artist , "the work explores a notion of the everyday and a desire to move out of that grounding situation. It explores the divide between high and low in art, design and architecture. These concerns and observations are not new but it is the quotidian and wishes of something materially “better” that resonates with me at the moment. The table is a fantastic example of a refined aesthetic and of engineering excellence, and a “design classic”. It’s something “better”. In the PICA artwork the table will be surrounded and supported by an inflated, carnivalesque structure which could be seen as its antithesis."

We had a great time attending the opening night and are proud to have our product included in this work.

Tuesday, 2 December 2008

Busy times

It has been a busy couple of months. We have delivered another UAV to cybertechnologies - (the second) cybird 5, with the remodeled intake and tailcone (refer earlier post) the new plane came in 5 kg lighter then the previous and standing out from the crowd in a high visibility orange.








Also underway are wingset patterns, moulds and parts for cybereye 2. A larger UAV with a wingspan of over 4 meters. The prototype has flown extremely well, and the new planes are due for flights in the new year.





Completed only today, is the first the carbon fibre wing mast for the 'whisper' International moth class project, the mast came out of the mould better than expected weighing 4kg for a 5.5m length, the overall stiffness of was impressive, considering the lightness of the laminate and surface area of the mast.

The complete boat is scheduled for completion before Xmas. Pending good results from sailing tests, a trip to Melbourne for the national titles in late January could be likely.

Saturday, 13 September 2008

CFD for hydrofoils




We were asked by Bladerider http://www.bladerider.com.au/ earlier this month to gather some baseline lift/drag data on their current hydrofoils, we sent out 3D models of the foils for CFD (computational fluid dynamics) analysis and now have the results back.
The purpose of this primarily, is to establish were the current foils are in relation to performance at differing speeds and angles of attack. After getting the baseline data we can now set about improving the speed and handling of the boats by either tweaking the design or creating new designs. It's interesting stuff and another great application of CAD software.
Over time we will generate some definitive answers and have some prototypes out there for real world testing that will then flow into production for the bladerider range of sailing hydrofoil boats.

CAD revision




In a previous posting we mentioned the reworking of the 3 metre UAV CAD file. After a solid week of work we completely resolved the structural and mechanical layout of the plane and tweaked some of the components either aerodynamically or mechanically.
We reviewed the jet intake aero package and made significant changes to the tailfin/horizontal stabiliser arrangement to better suit a full composite assembly.
I've attached some renderings of the revised plane.

Tuesday, 2 September 2008

V8 Dirt Drag Bike


We are doing some more parts at the minute for Attitude racing's nitro harley and it reminded to me to ask, how was the V8 dirt drag bike going. It was a wicked looking machine like something out of MAD MAX.

We completed the bodywork for them and the bike performed really well, and I've just been told in the off months the guys have been re-tuning the motor to increase the power almost 600 horsepower! I've included a photo of the bike as it appeared last year.

Monday, 18 August 2008

prosthetic leg


Prosthetic limbs are becoming another part of our client base these days, we already supply to podiatrists custom fitted composite orthotics, and custom fitted composite seats for the cerebral palsy association.

Now we are having good results with our prosthetic legs. We have just completed another composite leg for a patient. We are utilising a unique method where the mould (leg profile) is 'washed' out after manufacture to create a hollow structure that is sealed by the leg socket at one end and the reinforced foot attachment at the other. This means the leg can meet the weight target set for us by the prosthetist while maintaining an extra strong construction to meet the rigours of everyday movement.

3 metre UAV


We have just finished another UAV for Cybertechnologies PtyLtd. With a 3 meter wingspan and weighing approx 20kg its the largest one we've completed to date. This plane features retracting undercarriage, removable wings, tailcone and nose cone for transport and is powered by a small jet turbine.

The inbuilt autopilot means this plane can manage take-offs, flightpaths and landings back on the runway without any human assistance.

Composite Components, designed the laminate schedule, manufactured the components, handled the sub-assembly and then went back to edit the CAD model to reflect any changes arising from the build.

The plane was completed in 2 and a half weeks.

Sunday, 20 July 2008

UAV helicopter

We had been supplying UAV Vision http://www.uavvision.com.au/ with critical carbon fibre components for the helicopter chassis, so to supply the fuselage halves for their next helicopter - a collaboration with Cybertechnologies Pty Ltd. was great as we already had a good relationship.
The moulds were supplied so it was a quick build time for the 2 heli's.'
We didn't get to see them fly but I was sent the images from uav vision who told me everything went well at the flight tests and subsequent presentations.

Bladerider FX




Bladerider have launched the new FX, http://www.bladerider.com.au/ A fibregalss one-man sailboat on hydrofoils.
As part of the Research and Development team for Bladerider we were asked to come up with a really tough, economically priced epoxy resin based hull, with a hardwearing gelcoat finish. The weight limit was set at 20Kg.
After looking at several manufacturing processes we selected resin infusion, for a few key reasons: consistency between hull weights and less expansion/shrinkage issues relating to the mould/hull relationship among others.
We made a hull in Perth, shipped it to Melbourne for testing and some ''heavy weather'' abuse. We got some really positive feedback, but what stood out for them was how tough the hull construction was.
The FX has since sailed in the 2008 International Moth World Titles http://www.moth-sailing.org/ and came a credible 17th out of 94 starters. A pretty impressive result considering that the boat is probably 10kg heavier than most others, which really counts when a complete boat in this class can weight less than 30kg fully rigged.

lightweight rotor


Februry, saw the completion of our first 'mupod' rotor for Entecho http://www.entecho.com.au/ The brief was to improve on the previous rotor by making the next one stiffer and lighter, but mostly lighter. This was quite a task as the original one weighed only 380grams. a good weight for a 400mm dimeter part.
We were more than pleased when we met their challenge and come in a smidge under 260grams. The rotor looked really smart in a clear carbon fibre finish, which is in large part due to Entecho assisting with inhouse machining of aluminium tools dedicated to the pre preg process we selected, good communication and working time frame.